TC Hafford Basement Systems serving Milbridge, ME

Living in their home for less than 5 years now, this Milbridge, ME homeowner had noticed water beginning to leak into their basement through a crack in one of the concrete walls. Looking to have this crack repaired as soon as possible, the homeowner took to the internet to find a solution. They soon discovered TC Hafford Basement Systems and called us to set up their free estimate. We sent our sales representative to look at the crack and talk with the homeowner about potential repairs. They decided on what they wanted done and we got to work!

When our installation crew arrived at the home, their first task was to brush the area around and within the crack with a coarse brush. This would clear any debris that might hinder the sealant adhering to the wall. Next, the first layer of sealant was applied within the crack. This layer was soon covered over by a foam matting. This foam will give the finished seal flexibility so that it may remain over the crack if the wall were to shift at all. Finally, a second layer of sealant was applied over the foam, creating a FlexiSpan seal covering this crack. The FlexiSpan will ensure no more outside moisture enters this basement through the crack in the wall.

With their new seal in place, this homeowner can now be confident during rainfall that their basement will no longer take on water. The FlexiSpan seal will make sure of that!

A homeowner in Milbridge was having trouble with water finding its way into their basement. They had waterproofing systems in place, and this water should not have been able to get into their basement to begin with. This lead them to search online to find a solution; which is where they found TC Hafford Basement Systems. They contacted us and we sent out a representative to investigate the basement. After the investigation, we were able to identify the problem was two cracks in the wall. We then discussed possible solutions with the homeowner, and got to work!

Our crew located the cracks and set up Polyurethane injections. These injections fill each crack with Polyurethane, which flows as a liquid at first, before setting into a firm structure. This finished structure seals off the cracks completely, locking out any moisture trying to enter where it could previously easily flow. Now this homeowner has a dry basement once again!